A Complete Guide to Select Best Wheelchair Ramp

A Complete Guide to Select Best Wheelchair Ramp

Wheelchair ramps are ramps that wheelchair users can use in place of ladders, as well as people trolleys or wheelchairs. The Americans with Disabilities Act of 1990 (ADA) requires a structure or building to be wheelchair accessible and therefore requires a wheelchair ramp. A wheelchair ramp provides greater wheelchair access where vertical distance is required.

The law often requires new buildings to meet ADA standards using standards such as wheelchair ramps or manual controls. Sometimes it is necessary to add structures such as elevators or ramps to older buildings so that people with walkers, canes, wheelchairs, and even people with rampe handicapé who are not supported by technology can access a specific entrance.


You will find a number of specifications that you will need to adhere to in order to ensure that you are creating a ramp that you might find useful. You will need to refer to any helpful information that tells you how to build a wheelchair ramp so you can check the details you need. According to the American Disabled Persons Act (ADA), the slope must be thirty-six inches wide, include trim elements along with the landing area, include handrails, and include specific ramp angles to make sure they are not too extreme. These types of BOMs are usually very important when creating a new draft.

Building materials

You will also find that you can build a wheelchair ramp with a variety of building materials such as concrete, lightweight aluminum, wood, or perhaps iron. Concrete is one of the most expensive options, but also the most durable. Aluminum as a building material needs to be strong enough to withstand loads as it dents quite easily, and besides, motorized wheelchairs and electric scooters are much more important. Aluminum is also extremely expensive if you can get structural elements strong enough to carry the required weight. Structural steel and structural aluminum must also be textured to prevent these products from becoming slippery and unsafe, especially outside the home and exposed to rain or stormy weather. In fact, bare concrete will also need to be textured, but this is definitely an easier procedure for pouring / finishing concrete.

These different building materials differentiate your approach to creating a wheelchair ramp. The plan is essentially identical, but you will find several methods for creating a safe slope depending on what it is built on. Once you choose the style suggested, you may find that while you understand how to build a wheelchair ramp, you may not have access to the equipment, tools, or free time to complete it yourself as scheduled. On the other hand, an experienced specialist will assemble a team and complete the work in a short period of time. You will need to consider that with your existing spending budget and time constraints, you can work.

Follow the instructions ADA

As we mentioned above, it is imperative to follow the instructions of the Disability Act, but also remember that many pedestrians can also use the disabled ramp. Thus, a big additional requirement will be to make sure that the top edge of the ramp is at a sufficient level with the ground so that the wheels do not get stuck and people trip over the edge of the slope. Hope with this information you can outperform the wheelchair ramp work.